LED Load Resistor Kit
Turn Signal Fix
This 6 Ohm, 50 Watt resistors can be connected across the turn signal bulbs to simulate the load of a regular filament bulb (2 Amp load). This will solve LED related turn signal problems such as hyper flashing, no flashing or burnt out bulb indications. One resistor is required for each turn signal bulb. Includes gel filled moisture resistant splice taps.
Using included splice taps, connect one wire to ground and the other wire to the turn/brake wire. You don"t have to cut your car"s wiring. Squeeze slice taps with pliers. One Load Resistor required for each turn signal bulb.
2 prewired Resistors(4Ohm, 50W), and 4 Slice Taps